Turan Borfit

EF Valve Tapping TEE 360°

Electrofusion Fittings

PN 10-16, Ø 63-20 – Ø 400-63

Request a QuoteDownload Brochure
EF Valve Tapping TEE 360°

Technical Data

Material

PE 100, SDR 11 (PN16) / SDR 17 (PN10)

Standards

TS EN 1555-3:2010+A1 • TS EN 12201-3+A1

A tapping tee connects a new service line to a PE main. It is welded onto the main and its built-in cutter then drills through the pipe wall, so the main can stay in service. This version has an integrated valve to shut off the branch. The outlet turns through 360°, so the branch can point in any direction. It is welded with an electrofusion control unit: scrape and clean the pipe, position the fitting, connect the cables, scan the barcode and start the cycle.

Sizes run from Ø 63-20 mm to Ø 400-63 mm, PN 10-16. Material is PE 100 in SDR 11 (PN 16) or SDR 17 (PN 10), made to TS EN 1555-3 for gas and TS EN 12201-3 for water. The Dimensions & Codes tab lists every size with its product code.

More in Electrofusion Fittings

PE 100 45° Sweep Bend
PE 100 45° Sweep Bend
PE 100 90° Sweep Bend
PE 100 90° Sweep Bend
EF Coupler
EF Coupler
EF Elbow 45°
EF Elbow 45°
EF Elbow 90°
EF Elbow 90°
EF Equal TEE 90°
EF Equal TEE 90°
EF Reduced TEE 90°
EF Reduced TEE 90°
EF Reducer
EF Reducer
Electrofusion Fittings