Injection & Confection Kit Fittings
Injection moulded, fabricated and KIT fittings in PE 100, in every size up to Ø 2000 mm.
Elbow 11° (Confection)
PN 10-16, Ø 90 – Ø 1600
Elbow 30° (Confection)
PN 10-16, Ø 75 – Ø 1600
Elbow 45° (Injection)
PN 16, Ø 20 – Ø 75; PN 10-16, Ø 90 – Ø 400
Elbow 45° (Confection)
PN 10-16, Ø 710 – Ø 2000
Elbow 45° (KIT Injection Welded)
PN 10-16, Ø 450 – Ø 630
Elbow 60° (KIT Injection Welded)
PN 16, Ø 75 – Ø 90; PN 10-16, Ø 110 – Ø 630
Elbow 60° (Confection)
PN 10-16, Ø 710 – Ø 2000
Elbow 90° (Injection)
PN 16, Ø 20 – Ø 75; PN 10-16, Ø 90 – Ø 400
Elbow 90° (Confection)
PN 10-16, Ø 710 – Ø 2000
Tee 45° Equal (Injection)
PN 10-16, Ø 110 – Ø 160
Tee 45° Equal (Confection)
PN 10-16, Ø 90 – Ø 630
Tee 60° Equal (Confection)
PN 10-16, Ø 90 – Ø 630
Equal TEE 90° (Injection)
PN 16, Ø 20 – Ø 75; PN 10-16, Ø 90 – Ø 630
Equal TEE 90° (Confection)
PN 10-16, Ø 710 – Ø 1600
Reduced TEE 90° (Injection)
PN 16 / PN 10-16, Ø 32-20 – Ø 400-315
Reduced TEE 90° (Confection)
PN 10-16, Ø 450-50 – Ø 2000-1600
Reduced TEE 90° (KIT Injection Welded)
PN 10-16, Ø 25-20 – Ø 710-630
Reducer (Injection)
PN 16 – PN 32, Ø 25-20 – Ø 630-560
Short Type Reducer (Injection)
PN 10-16, Ø 450-315 – Ø 1000-800
Long Step Reducer (KIT Injection Welded)
PN 10-16, Ø 500-315 – Ø 630-560
Cap (Injection)
PN 16-20-25-32, Ø 20 – Ø 630
Cap (KIT Injection Welded)
PN 10-16, Ø 450 – Ø 630
Cross TEE 90° (Injection)
PN 10-16, Ø 75 – Ø 630
Cross TEE 90° (Confection)
PN 10-16, Ø 110 – Ø 400
Reduced Cross TEE 90° (Injection)
PN 16 / PN 10-16, Ø 63-25 – Ø 400-250
Reduced Cross TEE 90° (Confection)
PN 10-16, Ø 400-280 – Ø 630-400
Flange Adapter – Long Type (Injection)
PN 10-16, Ø 500 – Ø 630; PN 6-10, Ø 560 – Ø 2000
Flange Adapter – Short Type (Injection)
PN 16, Ø 20 – Ø 400
Reduced TEE 90° Short Type (KIT Injection Welded)
PN 10-16, Ø 450-110 – Ø 800-200
Short Step Reducer (Injection)
PN 10-16, Ø 630-400
Short Type Reducer (KIT Injection Welded)
PN 10-16, Ø 710-400 – Ø 1000-800
Reduced Cross TEE 90° (KIT Injection Welded)
PN 10-16, Ø 63-25 – Ø 400-250
ABOUT THIS RANGE
Injection, confection and KIT: what's the difference?
Not every fitting comes out of a single mould, so we make PE 100 fittings in three ways. Injection moulded fittings are produced in one shot, which gives tight dimensions and a smooth finish. Elbows, tees, reducers, caps, cross tees and flange adapters are made this way from Ø 20 mm upwards.
Confection (fabricated) fittings are cut from PE 100 pipe and butt-welded into shape. That is how we reach large diameters up to Ø 2000 mm and angles such as 11°, 30° and 60° that have no standard mould. KIT fittings are assembled from injection moulded parts welded together, so we can supply the sizes and combinations a project needs without making a new mould.
All three types have plain spigot ends in PE 100, SDR 11 or SDR 17, made to TS EN 12201-3 and TS EN 1555-3. They are joined to the pipe by butt fusion, or with electrofusion couplers where a butt welding machine won't fit.
FAQ
Frequently asked questions
What is a confection fitting?
A fitting fabricated from segments of PE 100 pipe that are cut and butt-welded together. It is used for large diameters and special angles.
What does KIT injection welded mean?
The fitting is assembled in our plant from injection moulded components welded together. This lets us supply sizes and combinations that have no dedicated mould.
What is the largest fitting you make?
Confection elbows and reduced tees go up to Ø 2000 mm, and long-type flange adapters also reach Ø 2000 mm.
How are these fittings joined to the pipe?
By butt fusion, or with electrofusion couplers when butt welding is not practical. The spigot ends match the pipe's SDR.